I was talking about gun market share. Not in the sense that 3D printing is taking today their share but big corps could easily be scared of future tech accessible at home or innovation not made by them. 3D printer/CNC… is changing and innovating so quick, so big Corps blocking access as early as possible makes sens to ensure corps will stay dominant and no new competitors.
PS: my english must be really shitty, you are the third person to mention something i have not said :/
Where did i say the right did it??
I know usa has bigger problem than guns like healthcare (bigger as it affects way more people than guns), my comment was only to answer to your why would they go after 3D printing.
A violent place without guns Will always be a better place than with.
(european here) i can imagine that the gun religion in usa directed by nra and big manufacturer needs to have someone to blame to divert eyes from lack of real legislation over guns and what best to blame that a growing sector that could potentially affect their share of market in future. They could be scared from the fast development of 3d printing and the crazy power of innovation a community can achieve, they could be left behind just by the lack of innovation.
Another way to say this: blocking consumer 3d printer is a way to reinforce their dominant position by ensuring there is not other path than going threw them and making sure their market share don’t drop because of new technology growing/changing fast while diverting the real issue USA has with guns.
A Quick search lend me to https://www.tenstickers.de/aufkleber/linux-pinguin-laptop-aufkleber-5634
Available at size 22cm X 25cm, It is a spanish based company.
You can find resources for each categories but don’t think there is one that would cover everything and the reason is there is always several ways to do things and not one way for all.
First you need to choose an OS. You have a few choices here, a good way to start if you don’t have much knowledge on linux command, docker… is to use something like Casa OS, Zima OS which are much more beginner friendly, it basically has a store where you can pick what you need to selfhost. If you already feel more confident and want absolute full control you can use proxmox instead.
Once you settled your OS, you need to pick what to use sleefhost image, music… Here you have again several solutions, you can check immich for pictures, jellyfin for music/video, home assistant for smart home.
A pi5 with 1gb ram will always be cheaper but that’s not enough ram for your usecase, search n150 at Aliexpress, you can often find some mini pc for around 150-160€ on sale with n150, 12gb lpddr5 (or 16gb ddr4 sodim) and 500gb SSD. https://a.aliexpress.com/_EQ5k2Uu This one was 153€ couple of days ago. Thay are other Chinese brand like soyo, beelink, bmax that have similar hardware. They are not as good as NUC, but they do the job for way cheaper.
Home assistant is a beast, not sure openhab can actually match it today. Unless you already have a pi5 and a SSD (avoid micro sd card), you could consider a mini pc with n150 (or n100) processor. It doesn’t consume much power (close to pi5) and it will be more powerful and more Ram which will be useful for immich.
Start with zigbee first, much more mature than thread. I don’t personaly use thread but i believe some zigbee dongle also can deal with thread at the same time.
About the setup. If mini pc, you can use proxmox so you will be able to create a VM for home assistant and another one for immich.
What protocol do you use? Using ZigBee, my sensors (temp, leak, doors) last about 2 years
That might depends on how your AC is working, I recently did the same at my dad’s house and run into issues because the temp control for the unit is reading from the remote. So when I sent infrared command to turn off unit, it worked as expected for some minutes then turned back on because remote sent back command as temp wasn’t meet. Still need to do a lot of testing to find a way to make it work, might need to disable remote and use some temp sensors for the triggering part but not sure how that will work, might need to use some hysterisis friendly climate addon for that…
There is also “consent o matic”, banner does appear but go away in less than a second and auto decline as possible. Does not work on 100% of website but still does a good job.
I’m no tech expert and I haven’t done this for a while so don’t know if that change but they were more packet loss/errors (not sure proper terms, not English native). For most files this isn’t an issue but was for more sensitive ones like programs/iso…
Battery also suffered more from this used, keeping phone charged while tethering wasn’t good due to battery management system. But things could have changed.
Last point is that bad weather does affect cellphone reception.
Can’t answer sorry
Comparison of self hosted photo library https://github.com/meichthys/foss_photo_libraries
I can’t remember any name but search for f2f (friend to friend) p2p. Basically a private way to share files over p2p to limited people you have accepted without any use of tracker like P2P use
Oh ok, the first thing that comes to my mind is Kodi. Depending your pc it might be a bit slow but that should work.
Edit: are you on linux or windows? If windows, you should really consider linux. Old pc comes back to life with linux as it needs way less ressources than windows
I guess you meant something to act as a remote desktop? Something lightweight better than a remote desktop for your use case is to setup a FTP server or a samba share. You will then use some media player client to read from there
I don’t know about jailbreak, but you can sideload games/apps. Will send a link in mp
Did setup a dual boot on a 2014 MacBook pro recently and also had issues with wifi. What solve the problem for me was to use an older kernel which fully supported wifi card driver. Can’t recall now which kernel i used but can check later if you don’t find the information.